Coats 9024E

The Easiest Way to Change Low Profiles, Run Flats and Alloy Wheels.

The Model 9024E is designed to take on the widest wheels and the toughest-to-change tires.  It's ideal for the high volume shop  where runflats and low profile tires are a growing part of the business.

The Model 9024E features an exclusive Pneumatic Drop Center Arm capable of flexing even the stiffest sidewalls and a Power Taper Roller to allow easy bead and rim lubrication. Swing in rollers help hold heavy tires when necessary, and a special Total Rim Protection Package protects even the most delicate wheels through the entire process.

It's the ultimate tire changer. For shops that want to do the ultimate in wheel service business.
Key Features
• Handles Rims up to 24".

• Pneumatic Drop Center can flex even stiffest sidewalls

• Power Taper Roller allows easy bead and rim lubrication

• Swing-in rollers help hold heavy tires

• Rim Clamp® design for unsurpassed reliability.

• Total Rim Protection guards expensive alloy wheels.
Rim Diameter 12"-24" Externally
12"-26" Internally
Rim Width 16" Maximum
Tire Diameter 47" Max Outside
Type of Drive System Air and Electric
Required Air Source 110 to 175 PSI
2HP Compressor
5 SCFM min. at 150 PSI
Chassis Footprint 56"W x 73"D x
83.5" H
Shipping Weight 1,025 Lbs.
Operation Two Wheel Positions
1st-Loosen Bead
2nd Mount/Demount
Wheels Handled Alloy, Steel, and Performance
Mount/Demount Mechanism Automatic Tilt Back
Tool Head Offset Pneumatic Lift, Set Back, and Lock
Shape Of Tabletop X-Shaped"
For Perimeter Support
of the Wheel
Wheel Clamping Method Four Clamps in Table
Top Actuated by One
3.75" Fiber Reinforced
Composite Cylinder
Height of Table From Floor 25.5"
Bead Loosening System Foot Control
Actuates 7 3/4"" Dual
Action Fiber
Cylinder That
Handles Wheels
Up to 15" Wide
Drive System U.S. Made 2 HP, 230/400V 3 Phase, 230V 3 Phase Heavy Duty Electric Motor Designed Specifically for Tire Changers
Pressure Limiter Standard
Bead Seating Reservoir Located in the
Vertical Tower With A
4.3 Gal. Capacity
Position of Inflation Gauge Permanently Mounted
in Upper Tower
Inflation Gauge Easily Calibrated
0 to 250 PSI Gauge
w/Damage Resistant
Lexan Faceplate
Air Supply Gauge (CAL OSHA) Optional
Water Filter Standard
Oil/Lubricator Standard
Nylon Demount Head

Optional