Coats 6065
 

Handle Larger Tires Without Hassle

The Model 6065 Rim Clamp™ tire changer is designed to accommodate today's larger tires and alloy wheels and make it easy for the operator to change tough tires on delicate wheels. The bead loosener features three support blocks for greater wheel protection, and an available total rim protection package keeps wheels looking like new change after change.

The 6065 also features a super-convenient extra storage bin so virtually anything the operator may need is at his fingertips.

The Inflation Guard is also a key feature. Combined with a pressure limited, it helps guard against accidents caused by over inflation or defective tire/wheel combinations. The Inflation Guard is credited with preventing operator injuries.

Rim Diameter (Standard Tabletop) 10"-17.5" Externally
13"-20" Internally
Rim Diameter (Extended Tabletop) 14"-21" Externally
16"-24" Internally
Tire Diameter 50" Max Outside
Type of Drive System Air and Electric
Required Air Source 110 to 175 PSI
5HP Compressor
14 to 15 SCFM at 150 PSI
Chassis Footprint 35"W x 44"D x 75" H
Shipping Weight 610 Lbs.

Key Features

• Rim Clamp® design ensures proper location of wheel on tabletop.

• Extra tall tower accommodates most passenger car and light truck tires.

• Choice of 1.5 HP air or 1.0 HP electric drives

• Built-in bead sealing and tabletop inflation

• Inflation guard helps protect operators in case of tire explosion.
Operation Two Wheel Positions
1st-Loosen Bead
2nd Mount/Demount
Wheels Handled Alloy & Steel
Mount/Demount Mechanism Manually Swings
Away from Wheel
Tool Head Offset Manual
Shape Of Tabletop "X-Shaped"
For Perimeter Support
of the Wheel
Wheel Clamping Method Four Clamps in Table
Top Actuated by One
3.75" Fiber Reinforced
Composite Cylinder
Height of Table From Floor 27"
Bead Loosening System Thumb Control
Actuates Fiber
Reinforced
Composite Cylinder
Handles Wheels
2"-17" with Choice
of 2 Blade Positions
Drive System Options
Air Drive
Electric Drive		 1.5 HP-Air Or
U.S. Made-1 HP
110V-1 Phase - 60 Cycle
Pressure Limiter Standard
Bead Seating Reservoir Located in the
Vertical Tower With A
3.8 Gal. Capacity
Position of Inflation Gauge Permanently Mounted
in Upper Tower
Inflation Gauge Easily Calibrated
0 to 60 PSI Gauge
w/Damage Resistant
Lexan Faceplate
Air Supply Gauge (CAL OSHA) 0 to 300 PSI
Water Filter Standard
Oil/Lubricator Standard
Storage Tray Standard
Inflation Guard System Standard
Nylon Demount Head

Standard